The AT-UPS3000R-RACK UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply network
The device is mounted to RACK 19" cabinet
The line-interactive power supplies analyse the voltage, frequency and phase shift angle on a current basis, and filter the voltage transmitted to the connected devices. When a mains failure is detected, the UPS immediately switches to autonomous operation mode and continues to power the equipment using the energy accumulated in internal batteries
100 / 110 / 115 / 120 V AC ± 5 % 200 / 220 / 230 / 240 V AC ± 5 % (Pure Sine Wave)
Output frequency:
50 / 60 Hz ± 0.3 Hz
Voltage adjustment:
Frequency adjustment:
Transfer time:
≤ 10 ms
Battery:
4 x 12V/9Ah
Number of outputs:
6 pcs IEC320 C13
Protections:
FuseOverloadShort-circuit Discharge Overcharge Temperature Ethernet filter
Additional protection:
RJ45
Operation state indication:
Large, readable LCD display with backlight : Voltage, Current frequency, Work load, Battery charge level, Temperature, Fan status, LED indicators displaying the device's operating status : Operation modes - On-Line / Battery / Bypass, Error, Sound signaling
Main features:
Auto restart while AC is recovering Automatic Voltage Regulator (AVR) "Cold Start" function Remote management Excellent microprocessor control guarantees high reliability UPS auto diagnostic system Battery charge and maintenance control Automatic battery charging in OFF mode USB port - Access from PC SNMP - Option Power-saving mode (selectable in the menu)
Application:
Surveillance Systems data storage centers network, servers, workstations Industrial Equipment
The Green Cell UPS emergency power supply with On-Line topology is characterized by a double conversion of the supply voltage, thanks to which the emergency power supply becomes a protective barrier between mains surges and connected devices.The device is mounted to RACK 19" cabinetThe UPS14 unit is equipped with AGM Green Cell batteries, which provide...
840 Watts | 1300 VA | Typical runtime at full load 1.25 min | Typical runtime at half load 8.5 min | Topology Offline | Phase 1phase | Output power connector type Schuko CEE 7 | Included Accessories Input cableUSB cableQuick startSafety instructions | Colour Black
840 Watts | 1200 VA | Typical runtime at full load 2 min | Typical runtime at half load 10 min | Wave form type Modified sinewave | Topology LineInteractive | Phase 1phase | Input ports Hard Wire 3 wire (1PH+N+G) | Output power connector type Hard Wire 3-wire (1PH + N + G) | Colour Black
The UPS is designed to power devices with low power consumption, such as a routerThe device has a small casing, economical design and automatic start in the absence of mains powerThe UPS has a built-in PoE 15V/24V interface to provide data transmission and power through a single RJ-45 connector
SINUS-PRO-2200E is a 1600 W/2200 VA uninterruptible power supply with pure sine wave, AVR and built-in 12V/20A charger. In the event of a 230V outage, it automatically switches to the battery, keeping CO stoves, pumps or servers running; >92% efficiency and full protection ensure stable power supply. Designed for 12V AGM/GEL batteries.
540 Watts | 900 VA | Typical runtime at full load 10 min | Typical runtime at half load 1.5 min | Topology Offline | Phase 1phase | Included Accessories Input cableUSB cableQuick startSafety instructions | Colour Black
1500 Watts | 1500 VA | Wave form type Pure sinewave | Topology LineInteractive | Phase 1phase | Input ports Single, IEC320 C14 | Output power connector type IEC 320 C13 (10A) | Multi-function LCD status and control console
The AT-UPS1000S-LCD UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe line-interactive power supplies analyse the voltage, frequency and phase shift angle on a current basis, and filter the voltage transmitted to the connected devices. When a mains failure is detected, the UPS...
1050 Watts | 1500 VA | Wave form type Sinewave | Topology LineInteractive | Input ports Single, IEC320 C14 (10AMP) | Output power connector type IEC 320 C13 | Colour Black
The VI-1500-RT/LCD UPS is a professional device used to maintain the operation of the components connected to itAdditionally protects the connected equipment against overvoltages
The COVER-BASIC-1K+2X9AH UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe device is a power supply adapter equipped with True On-Line Double Conversion (VFI IEC62040) technology, which ensures excellent sinusoidal voltage parameters, regardless of power interference and the type of...
The AT-UPS3000R-RACK UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply network
The device is mounted to RACK 19" cabinet
The line-interactive power supplies analyse the voltage, frequency and phase shift angle on a current basis, and filter the voltage transmitted to the connected devices. When a mains failure is detected, the UPS immediately switches to autonomous operation mode and continues to power the equipment using the energy accumulated in internal batteries
