ADSA-FPX USB-C 10Gbps FAST PORT X adapter for 2.5"/3.5" SSD/HDD
USB-C 10Gbps adapter for fast connection of 2.5" / 3.5" SATA SSD/HDD. USB C-C cable 60 cm + C-A adapter.
The AXAGON ADSA-FPX FAST PORT X universal adapter with USB-C 10Gbps and SATA 6G interface is designed to easily connect a 2.5" / 3.5" SATA hard drive or SSD to your computer. Thanks to the fast USB 3.2 Gen 2 interface with the transmission rate of up to 10 Gb/s, the speed of 2.5" SSDs is not limited and is approximately 20% faster than USB 3.2 Gen 1 (USB 3.0) adapters or boxes.
In the package you will find a USB-C <-> USB-C cable 60 cm with a fixed USB-C -> USB-A reduction. This solution enhances the versatility of the adapter, so you can connect it to any USB port on your computer, whether it's a double-sided USB-C connector or a traditional USB-A connector. Also included is a 12V/2A (24W) power adapter for powering 3.5" hard drives. The adapter with a 2.5" SSD/HDD just needs to be powered over the USB bus, so there is no need to manipulate the AC adapter.
The USB to SATA reduction also supports all important features for seamless operation with different types of drives. Such as UASP for faster data transfer, TRIM for limiting the gradual degradation of SSD performance over time, S.M.A.R.T. for monitoring the status of the drives, BOOT for the ability to boot from drives connected to the reduction, Auto Spindown to automatically put drives to sleep during prolonged inactivity, Turn Off to shut down the drives after removing the device or putting the PC to sleep, and USB Bus Power to power the adapter including connected drives only from the USB port.
The slim and compact adapter enables easy and quick disc replacement without the need for assembly, and at the same time, thanks to its minimal dimensions, it can be readily at hand at any time. The matte design of the cover prevents unwanted fingerprints.
These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for backup, migration, data transfer, storage and recovery, discs testing, etc.
Form Factor 2,5" | Included Accessories • USB 3.0 - SATA 6G adapter,• USB 3.0 cable 10 cm,• plastic case for 2.5" disk and USB adapter,• foam pads for 7 mm HDDs and SSDs | Colour Black
Form Factor 2,5" | Included Accessories • USB-C 3.2 Gen 1 external box for 2.5" SATA disk,• USB-C - USB-A cable 40 cm long,• self-adhesive foam pads for 7 mm HDD and SSD | Colour Black
Form Factor M.2 | Included Accessories - Passive cooler- metal frame- 3 thermally conductive pads- mounting kit and screwdriver- simplified instructions- packed in a cardboard box
