Tootekood: 1433340

Kaubamärk: TENDA

WRL CAMERA 3MP PAN/TILT/RP3 TENDA

RP3 v3.0|Sensor size 1/3 Progressive Scan CMOS|Resolution 3 Mega Pixel|Microphone Built-in|Power options 5V|Power supply requirements 5 V 1A, Type-C Power Plug|Colour White|Included Accessories Power Adapter (cord length: 1.5m),Installation Template,Mounting Bracket,Mounting Accessories Kit,Quick Installation Guide|Dimensions 76.7 x 76.7 x 110.4mm|box...
17,04 €
Vaata lähemalt
Laos
Kõik enim müüdud tooted
SSD ACC DOCK STATION USB-C/2XM.2 NVME ADSA-M2C AXAGON
  • SSD ACC DOCK STATION USB-C/2XM.2 NVME ADSA-M2C AXAGON

SSD ACC DOCK STATION USB-C/2XM.2 NVME ADSA-M2C AXAGON

1438635
AXAGON
Included Accessories • NVMe dock, • power adapter 100-240V / 5V-3A,• USB-C <-> USB-A cable 25 cm,• USB-C <-> USB-C cable 25 cm|Colour Grey
100,83 €
KM-ga
Tarneaeg 1-5 tööpäeva.
Kogus
Laos
13 Tooted

Kirjeldus
ADSA-M2C SuperSpeed USB-C 10 Gbps dual M.2 NVMe dock

Dual USB 3.2 Gen 2 docking station for M.2 NVMe SSDs with cloning function.

The AXAGON ADSA-M2C DUAL NVMe CLONE MASTER DOCK SuperSpeed USB-C 10 Gbps docking station quickly and easily connects up to two NVMe (PCI-Express) M.2 SSD disks to your computer. Comfortable connection allows reversible USB-C connector. You will find two cables to connect the box in the package - standard USB-C -> USB-A cable and also USB-C -> USB-C cable.

This little helper will give you the easiest and fastest way to connect up to two NVMe M.2 SSDs to your computer. You just take the M.2 card and insert it into the base, no tools or accessories are needed. Replacing M.2 SSDs is very fast and easy.

You can also use the docking station to easily clone the contents of connected NVMe disks without the need to connect to a PC. Insert the source M.2 disk into the first slot of the station (source) and insert the target M.2 disk into the second slot (target). Then you just press the clone button and watch the cloning process on a scale of four LEDs. After all the data has been copied, there is an exact copy of the original M.2 disk on the destination disk. The dock can thus be used as an autonomous device for convenient duplication and disk image creation. This is the easiest way to transfer the contents of one SSD to another SSD, including a working operating system (Windows, macOS, Linux...).

Fast USB 3.2 Gen 2 interface and NVMe Express support with UASP function support allow you to enjoy the speed of modern NVMe M.2 SSD disks. TRIM support to reduce gradual degradation of SSD performance over time. Reading S.M.A.R.T. information monitoring the condition of the connected disks.

Low docking station centre of gravity is for good stability. Rubber anti-slip pads prevent sliding on the table. Modern minimalist design of aluminum body.
Üldine informatsioon
AXAGON
1438635
13 Tooted

Lisainfo

Müüja koduleht
www.axagon.eu/en/produkty/adsa-m2c?ami 219
Mõõtmed
68 x 68 x 17 mm
Kaasasolevad tarvikud
NVMe dock, power adapter 100-240V / 5V-3A, USB-C - USB-A cable 25 cm, USB-C - USB-C cable 25 cm
Värv
Grey
Garantija
24
Mudel
ADSA-M2C
Category Code
HDA
Unit Box Height
0.095
Unit Box Length
0.07
Unit Box Width
0.17
Units per Shipping Box
1
Unit Calculated Volume
0.00113 cubm
Product Net Weight
0.094 kg
Unit Calculated Weight
0.35 kg

Eriviited

ean13
8595247906496
MPN
ADSA-M2C
Samas kategoorias on veel 16 toodet :

Jälgi meid Facebookis