The SINUSPRO-500E UPS is a device used for uninterruptible power supply of computers, servers and computer sets as well as electronics and household appliances
This device is designed to work in the off-grid system, which means that the power outputs are intended only for direct supply of energy to receivers
In the event of a power failure from the 230V AC mains, the device switches to battery operation mode, allowing for further uninterrupted operation of the system and protecting against irretrievable data loss
The AVR stabilizer stabilizes the voltage from the mains so that the output is within the range of energy standards and thus safe for all equipment connected to it
It is especially important when powering sensitive electronic devices, such a
Pure Sine Wave - mains power mode, battery operation
Power adapter type:
Line-interactive
Nominal power:
350 W
Apparent Power:
500 VA
Input voltage:
170 V ... 270 V AC
Input frequency:
45 ... 65 Hz
Output voltage:
216 V ... 245 V AC - Automatic Voltage Regulator (AVR) (mains power mode) 230 V AC ± 1 % - battery, battery operation
Output frequency:
50 Hz ± 0.5 Hz
Voltage adjustment:
Frequency adjustment:
Transfer time:
≤ 4 ms
Battery:
12 V (not included)
Number of outputs:
2 pcs - 1 x CEE 7/5, 1 x CEE 7/3 (Schuko)
Management software:
Protections:
FuseOverload Temperature Overvoltage Undervoltage Discharge Short-circuit Overcharge protection
Operation state indication:
LED display : Operation modes, Failure signaling, Overload signaling, Work load, Battery charge level, Input voltage, Output voltage, Current frequency - Output
Main features:
Microprocessor control system Automatic Voltage Regulator (AVR) Operation modes : NORMAL WORKING (mains power mode), BATTERY MODE (battery operation) Battery charging Battery charging current : 5 A / 10 A (switchable) Voltage Converter (Pure Sine Wave) Efficiency > 92 % Solid workmanship
Application:
Surveillance Systems Personal Computers network, servers, workstations RTV Household appliances
The AT-UPS850-LED UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe device works with power supply adapters having Active Power Factor Correction (APFC)
The AT-UPS1000S-LCD UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe line-interactive power supplies analyse the voltage, frequency and phase shift angle on a current basis, and filter the voltage transmitted to the connected devices. When a mains failure is detected, the UPS...
The AT-UPS3000RT/2-RACK UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe device is mounted to RACK 19" cabinetThe device is a power supply of the online type and provides advanced mode of operation in total separation from the external mains. Thanks to this, it completely isolates...
The AT-UPS3000/2-LCD UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe device is a power supply of the online type and provides advanced mode of operation in total separation from the external mains. Thanks to this, it completely isolates connected devices and performs in practice the...
The SINUSPRO-500W UPS is a device used for uninterruptible power supply of computers, servers and computer sets as well as electronics and household appliancesIn the event of a power failure from the 230V AC mains, the device switches to battery operation mode, allowing for further uninterrupted operation of the system and protecting against irretrievable...
The AT-UPS2000R/2-RACK UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe device is mounted to RACK 19" cabinetThe line-interactive power supplies analyse the voltage, frequency and phase shift angle on a current basis, and filter the voltage transmitted to the connected devices. When a...
The AT-UPS2000RT/2-RACK UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe device is mounted to RACK 19" cabinetThe device is a power supply of the online type and provides advanced mode of operation in total separation from the external mains. Thanks to this, it completely isolates...
The AT-UPS2000S-RT-RACK UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe device is mounted to RACK 19" cabinetThe line-interactive power supplies analyse the voltage, frequency and phase shift angle on a current basis, and filter the voltage transmitted to the connected devices. When a...
The UPS is designed to power devices with low power consumption, such as a routerThe device has a small casing, economical design and automatic start in the absence of mains powerThe UPS has a built-in PoE 15V/24V interface to provide data transmission and power through a single RJ-45 connector
The VI-2000/LCD UPS is a professional device used to maintain the operation of the components connected to itAdditionally protects the connected equipment against overvoltages
The AT-UPS2000RT/3-RACK UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe device is mounted to RACK 19" cabinetThe device is a power supply of the online type and provides advanced mode of operation in total separation from the external mains. Thanks to this, it completely isolates...
The AT-UPS2000S-LCD UPS has been equipped with a number of advanced technologies ensuring active monitoring of the power supply networkThe line-interactive power supplies analyse the voltage, frequency and phase shift angle on a current basis, and filter the voltage transmitted to the connected devices. When a mains failure is detected, the UPS...
The UT1050EG-FR/UPS UPS is a professional device used to maintain the operation of the components connected to itThe UPS UT CyberPower series has been equipped with the best-in-class housing of fireproof plastic, which provides outstanding fire resistance and helps to minimize possible losses in the case of fire
The UPS is designed to power devices with low power consumption, such as a routerThe device has a small casing, economical design and automatic start in the absence of mains power
The SINUSPRO-500E UPS is a device used for uninterruptible power supply of computers, servers and computer sets as well as electronics and household appliances
This device is designed to work in the off-grid system, which means that the power outputs are intended only for direct supply of energy to receivers
In the event of a power failure from the 230V AC mains, the device switches to battery operation mode, allowing for further uninterrupted operation of the system and protecting against irretrievable data loss
The AVR stabilizer stabilizes the voltage from the mains so that the output is within the range of energy standards and thus safe for all equipment connected to it
It is especially important when powering sensitive electronic devices, such a
