Included Accessories • PCI-Express adapter with a standard bracket,• low profile bracket,• 2 pcs. thermally conductive pads,• SATA data cable 50 cm long,• mounting material and a screwdriver
A PCI-Express x4 adapter to connect up to two M.2 disks to a computer. 1x NVMe M-key + 1x SATA B-key.
The internal AXAGON PCEM2-D adapter allows to connect as many as two M.2 SSD to a desktop. So, it is an ideal choice for upgrading a desktop computer that has no M.2 slot.
The adapter supports the use of both one-sided and double-sided SATA and NVMe (PCI-Express) M.2 SSDs. The reduction does not limit SSD capacity, and any M.2 cards with a length up to 110 mm can be used. The simultaneous operation of both disks is commonplace.
Thanks to PCI-Express interface compatible with x4, x8 and x16 slots, a maximum transmission rates can be achieved. When compared to standard SATA SSDs, bit rates of NVMe SSDs are many times higher.
The high quality card design, including copper-plated vents, assists in a better dissipation of heat generated during the M.2 SSDs operation.
Double LEDs indicate either power on or data transfer in the M.2 slot.
The package also contains a low profile bracket for mounting the adapter into low profile cases.
PCI-Express adapter with a standard bracket, low profile bracket, 2 pcs. thermally conductive pads, SATA data cable 50 cm long, mounting material and a screwdriver
Form Factor M.2 | Included Accessories • USB-C 10Gbps external box for M.2 SSD,• USB-C - USB-C cable 20 cm long,• 3 thermal conductive pads,• mounting material and a screwdriver | Colour Black
Form Factor 2,5" | Included Accessories • USB 3.0 - SATA 6G adapter,• USB 3.0 cable 10 cm,• plastic case for 2.5" disk and USB adapter,• foam pads for 7 mm HDDs and SSDs | Colour Black
Form Factor 2,5" | Included Accessories • USB-C 3.2 Gen 2 external box for 2.5" SATA disk,• USB-C - USB-A cable 60 cm long,• USB-A - USB-C adapter,• self-adhesive rubber pads,• mounting material and screwdriver | Colour Black
Form Factor M.2 | Included Accessories • PCI-Express adapter with a standard bracket,• low profile bracket,• thermally conductive pad,• mounting material and a screwdriver
Form Factor 2,5" | Included Accessories • USB-C 3.2 Gen 1 external box for 2.5" SATA disk,• USB-C - USB-A cable 40 cm long,• self-adhesive foam pads for 7 mm HDD and SSD | Colour Black
Form Factor M.2 | Included Accessories • USB-C 3.2 Gen 2 external box for NVMe M.2 SSD,• USB-C – USB-C cable 20 cm long,• 2 thermal conductive pads,• mounting kit and screwdriver | Colour Black
Included Accessories • PCI-Express adapter with a standard bracket,• low profile bracket,• 2 pcs. thermally conductive pads,• SATA data cable 50 cm long,• mounting material and a screwdriver
