Дом
Марка
  • Только онлайн
RACK CABINET WALL MOUNT A19-AL
  • RACK CABINET WALL MOUNT A19-AL
  • RACK CABINET WALL MOUNT A19-AL

RACK CABINET WALL MOUNT A19-AL

A19-AL
  • The mount is used to install hanging RACK cabinet on wall
4,30 €
С НДС
Доставка 1-5 раб.дня
Количество
Доставка 1-5 раб.дня
50 шт.

Описание
Holes diameter: 10 mm
Color: Black
Weight: 0.25 kg
Guarantee: 2 years
Спецификации
A19-AL
50 шт.
В этой же категории также есть 16 товаров:
Только онлайн SIDE MOUNTING PANEL FOR RACK CABINETS ZMB-1-800 Быстрый просмотр

Код: ZMB-1-800

SIDE MOUNTING PANEL FOR RACK CABINETS ZMB-1-800

The ZMB-1-800 panel is used for vertical mounting of devices on the side wall of a RACK cabinetIt is mounted on the front and rear RACK rails (left or right)Thanks to this, an unprecedented factor of filling the cabinet with this type of equipment has been achieved, while maintaining good access to devices, adequate ventilation, transparency of...
48,08 €
Еще
Доставка 1-5 раб.дня
Только онлайн FAN HEATER HVL-031-150W Быстрый просмотр

Код: HVL-031-150W

FAN HEATER HVL-031-150W

The HVL-031-150W fan heater is designed for installation in closed cabinetsHeaters and fan heaters prevent condensation of water vapor and maintain the proper operating temperature of the devicesAttention!For safety reasons, you should keep a minimum distance of 150mm from the cables and other equipmentTo maintain the constant temperature level in a...
106,90 €
Еще
Доставка 1-5 раб.дня
Только онлайн Новое VOLTAGE DISTRIBUTION PANEL VDP19-3U-B STALFLEX Быстрый просмотр

Код: VDP19-3U-B

Марка: STALFLEX

VOLTAGE DISTRIBUTION PANEL VDP19-3U-B STALFLEX

The enclosure with a DIN rail for RACK cabinets is intended for mounting equipment located inside DIN enclosures, for RACK 19" cabinetsThe enclosure features a DIN rail, length: 22 x 1SThe height of the mounted module cannot exceed 160 mmThe enclosure can accommodate max. 22 fuses, 1 S wide.
24,71 €
Еще
Доставка 1-5 раб.дня
Только онлайн MOUNTING PLATE A19-TS-35/BL-4U Быстрый просмотр

Код: A19-TS-35/BL-4U

Марка: PULSAR

MOUNTING PLATE A19-TS-35/BL-4U

The A19-TS-35/BL-4U mounting metal plate is designed for mounting devices compliant with DIN standard in the rear part of a Rack 19" cabinetThe connection of the rail with the plate ensures mechanical stability of the mounted equipment, plus the possibility of attaching the power and signal cables to the mounting plate
37,37 €
Еще
Доставка 1-5 раб.дня

Присоединяйтесь к нам в Facebook

Facebook