1xNumber of displays supported, Maximum weight capacity 36.4 kg, Minimum screen size 32 ", Maximum screen size 60 ", Minimum VESA mount 100 x 100 mm, Maximum VESA mount 400 x 400 mm, Mounting type Wall, Tilt adjustment Yes, Tilt angle range -2 - 10 °, Swivelling Yes, Distance to the wall (min) 42 mm, Colour Black, Housing material Steel,...
ValueRAM's KVR32N22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Compatible memory cards MicroSDHC, MicroSDXC, MicroSD (TransFlash), 1xNumber of memory card slots, Data transfer rate 480 Mbit, s, Colour Grey, Housing material Zinc, Interface USB 2.0 Type-C, Weight 3.5 g
