The MS-6818 meter allows to identify and track cables placed in walls or buried underground
The meter's method of operation also allows the tracking of the position of other metal installations, such as water and sewage pipes, elements of heating installations (including floor installations) and other
In addition, the MS-6818 meter also allows to detect faults and short circuits of the electrical cables
The device enables operation both in the disconnected circuit and in the presence of mains voltage (AC and DC)
In the case of a mains voltage presence, both the transmitter and the receiver will display on the screens a warning about working on a live circuit
The transmitter also has the ability to measure the voltage in the circuit in the ran
Wire continuity test, Searching the place of wire damage, 3 operating modes: unipolar, bipolar, loop, The ability to identify any metal elements of electrical, plumbing, heating installations, etc., Detection of the cable in the wall and underground at depth up to 2m, The possibility of operating under mains voltage and in a circuit without voltage, 8 transmission codes set on the transmitter and distinguished by the receiver, Built-in buzzer allows to operate the device without looking at the screen
Transmitter : 9V, type 6LR61 battery - included Receiver : 6 x 1.5V, type AAA/LR03 battery - In the kit
0.37 kg - Transmitter 0.27 kg - Receiver
190 x 90 x 41 mm - Transmitter 241 x 79 x 38 mm - Receiver
The wattmeter allows you to check the electricity consumption and calculate the energy costs of the connected device.It has a large LCD display and simple configuration of the cost measurement setting.
The UT-191E is a universal digital meter used to measure: voltage, current, resistance, capacitance, frequency, and checking the correctness of diodes operationThe meter has the function of automatic change of measuring ranges, as well as the relative measurement modeThe device meets the IP65 tightness class
The UT-593 is a multifunction meter for measurements in electrical installations, dedicated to electriciansThe device is also a comprehensive tester for the safety of electrical installationsThe UT-593 allows you to measure insulation resistance, short circuit loop impedance with/without RCD tripping, line impedance, continuity of protective and...
The UD-P3303A laboratory power supply allows you to generate a constant voltage or current with strictly defined parametersThe device can work in one of two modes: as a source of constant voltage or as a source of constant currentAdditionally, the power supply adapter has the option of internal serial or parallel connection of outputs
The UT-P1305 laboratory power supply allows you to generate a constant voltage or current with strictly defined parametersThe device can work in one of two modes: as a source of constant voltage or as a source of constant current
UT-33A+ is a universal digital meter used to measure: voltage, current, resistance, capacitanceThe meter has a function of automatic change of measuring ranges, as well as a relative measurement function (for capacitance measurement)
The UT-526 meter is a specialist device designed to measure insulation resistance up to 500MΩ and perform RCD tests (residual current devices)Additionally, the Continuity function allows you to test the ground line loop resistanceAttention!High voltage is required to correctly measure the insulation resistance valueDuring the measurement one should be...
The UT-139C is a universal digital meter used to measure: voltage, current, resistance, capacity, frequency, temperature and checking the correct operation of diodesEF function - enables non-contact voltage detection eg in wires, in the range of 50V ... 400VThe kit includes a thermocouple of type "K" (chromel/alumel)