Li-Ion battery 1800 mAh Power adapter 12 V / 1.5 A (power adapter included)
240 x 320 " TFT LCD
Sound signaling Spectrum measurement mode Signal level is expressed in dBμV, and quality in % Constellation diagram Measurement of C/N, S/N, BER DiSEqC and 22kHz control support DVB-S signals measurement / DVB-S2 - SD and HD quality channels Flashlight built-in UNICABLE 1.0 / 2.0 technology support Digiturk MDU technology support
The UT-07B-EU tester indicates the correctness of the L, N, PE wiring in the electrical socketIn addition, it has the function of testing the efficiency of the operation of RCD residual current devicesThe device case is made from a solid plastic, which guarantees the reliability and long-term working during the installations.Attention!The RCD test is only...
The device allows for the identification and tracking of cable wire in the group of wires without damage the insulationTester can indicate the state of the telephone line, what helps to resolve the installation and preservation problems
The meter UT-512 is a specialized device designed to measure insulation resistance in the range from 0.5MΩ to 100GΩAttention!High voltage is required to correctly measure the insulation resistance valueDuring the measurement one should be particularly careful and strictly follow the recommendations included in the device manual
The UT-P3315-TFL-II laboratory power supply allows you to generate a constant voltage or current with strictly defined parametersThe device can work in one of two modes: as a source of constant voltage or as a source of constant current
The wattmeter allows you to check the electricity consumption and calculate the energy costs of the connected device.It has a large LCD display and simple configuration of the cost measurement setting.
The SF-500 satellite meter allows to quick set the satellite dish signal.The SF-500 is equipped with readable menu, which helps to operate for each installer. The device has implemented over a dozen satellite positions (satellites + transponders)The SF-500 model allows to DVB-S/S2 signals measurementAttention!The built-in compass is too inaccurate to...
The SF-100 tilt meter is very simple and convenient to operate device to optimal set the level of the signal receiving from a satellite dishThe meter is equipped with the tilt indicator of the signal level and acoustic beeper with variable intensity of sound, which helps to accurate and fast setting of the dish position