Operation modes : Power consumption, Voltage, Current consumption, Current frequency, Power factor, Cumulated amount of electricity, Cumulative cost of electricity, Programmable price of 1 kWh, Cost of electricity ( €/kWh ), Cumulative time of energy consumption measurement The average weight of CO2 emissions for the production of consumed energy Large, readable LCD display Simple configuration of the cost calculation setting built-in battery
2P+Z, E type
230 V AC, 50 Hz 3.6 V DC, 40 mAh NiMH - built-in battery
The UT-139C is a universal digital meter used to measure: voltage, current, resistance, capacity, frequency, temperature and checking the correct operation of diodesEF function - enables non-contact voltage detection eg in wires, in the range of 50V ... 400VThe kit includes a thermocouple of type "K" (chromel/alumel)
The UT-136C+ is a universal digital meter used to measure: voltage, current, resistance, capacity, frequency, temperature and checking the correct operation of diodesThe kit includes a thermocouple of type "K" (chromel/alumel)
The WS-6934 satellite meter allows to quick set the satellite dish signal.The WS-6934 is equipped with readable menu, which helps to operate for each installer. The device has implemented over a dozen satellite positions (satellites + transponders)The WS-6934 model allows to DVB-S/S2 signals measurementAttention!The built-in compass is too inaccurate to...
The SM-800 satellite meter allows to quick set the satellite dish signal.The SM-800 is equipped with readable menu, which helps to operate for each installer. The device has implemented over a dozen satellite positions (satellites + transponders)The SM-800 model allows to DVB-S2 signals measurement
The UT-526 meter is a specialist device designed to measure insulation resistance up to 500MΩ and perform RCD tests (residual current devices)Additionally, the Continuity function allows you to test the ground line loop resistanceAttention!High voltage is required to correctly measure the insulation resistance valueDuring the measurement one should be...
The MS-6818 meter allows to identify and track cables placed in walls or buried undergroundThe meter's method of operation also allows the tracking of the position of other metal installations, such as water and sewage pipes, elements of heating installations (including floor installations) and otherIn addition, the MS-6818 meter also allows to detect...
The NS-468 tester is designed to test the correctness of the cable terminating, wires sequence in RJ-45, RJ-12 and RJ-11 plugThe test can be made with two speedsTo test the cable the Main Tester must be connected to the one plug of the cable and the Remote to the other oneThe device case is made from a solid plastic, which guarantees the reliability and...
The UT-595 is a multifunction meter for measurements in electrical installations, dedicated to electriciansThe device is also a comprehensive tester for the safety of electrical installationsThe UT-595 allows you to measure insulation resistance, short circuit loop impedance with/without RCD tripping, line impedance, continuity of protective and...
The UT-191E is a universal digital meter used to measure: voltage, current, resistance, capacitance, frequency, and checking the correctness of diodes operationThe meter has the function of automatic change of measuring ranges, as well as the relative measurement modeThe device meets the IP65 tightness class