CABLES TESTER ST-248

The ST-248 allows to check the proper install and the order of wires of the RJ-45 plug and can also tests if there is a signal between two ends of the coaxial cable with BNC plugsThe test can be made with two speedsTo test the cable the Main Tester must be connected to the one plug of the cable and the Remote to the other oneThe device case is made from a...

CABLES TESTER NS-468

The NS-468 tester is designed to test the correctness of the cable terminating, wires sequence in RJ-45, RJ-12 and RJ-11 plugThe test can be made with two speedsTo test the cable the Main Tester must be connected to the one plug of the cable and the Remote to the other oneThe device case is made from a solid plastic, which guarantees the reliability and...

CABLE TRACKER MS-6818

The MS-6818 meter allows to identify and track cables placed in walls or buried undergroundThe meter's method of operation also allows the tracking of the position of other metal installations, such as water and sewage pipes, elements of heating installations (including floor installations) and otherIn addition, the MS-6818 meter also allows to detect...

CABLE TRACKER MS-6812

The device allows for the identification and tracking of cable wire in the group of wires without damage the insulationTester can indicate the state of the telephone line, what helps to resolve the installation and preservation problems

GROUNDING RESISTANCE METER UT-522 UNI-T

The UT-522 meter allows to measure: grounding resistance of power installations, grounding resistance of devices, resistance of lightning protection systems, etc.The design of the device allows for a complete, accurate measurement of the grounding resistance using 3 leads and a simple, approximate measurement using 2 leads

METER OF CAPACITANCE, INDUCTANCE AND RESISTANCE UT-603

The UT-603 meter allows you to measure capacitance, inductance, resistance, hFE, and also has the function of checking diodes and circuit continuity

CABLES TESTER UT-681L UNI-T

The UT-681L tester is designed to test the correctness of the cable terminating, wires sequence in RJ-45 and RJ-11 plugThe test can be made with two speedsTo test the cable the Main Tester must be connected to the one plug of the cable and the Remote to the other oneThe device case is made from a solid plastic, which guarantees the reliability and...

MAINS SOCKET TESTER WITH RCD CHECKING FUNCTION UT-07B-EU UNI-T

The UT-07B-EU tester indicates the correctness of the L, N, PE wiring in the electrical socketIn addition, it has the function of testing the efficiency of the operation of RCD residual current devicesThe device case is made from a solid plastic, which guarantees the reliability and long-term working during the installations.Attention!The RCD test is only...

LIVE WIRE, METAL AND WOOD DETECTOR UT-387B UNI-T

The UT-387B detector allows to detect wooden, metal objects and live wires placed in the wall

INSULATION RESISTANCE METER + RCD TESTER UT-526 UNI-T

The UT-526 meter is a specialist device designed to measure insulation resistance up to 500MΩ and perform RCD tests (residual current devices)Additionally, the Continuity function allows you to test the ground line loop resistanceAttention!High voltage is required to correctly measure the insulation resistance valueDuring the measurement one should be...

SOUND LEVEL METER UT-353 UNI-T

CABLE PAIR DETECTOR WITH RJ-45 CABLE TESTER UT-682 UNI-T

The UT-682 tester is designed to test the correctness of the cable terminating, wires sequence in RJ-45 and RJ-11 plugThe device helps in finding telephone and internet cables, power and live cablesThe device case is made from a solid plastic, which guarantees the reliability and long-term working during the installations.

MULTIFUNCTION METER FOR ELECTRICAL INSTALLATIONS UT-593 UNI-T

The UT-593 is a multifunction meter for measurements in electrical installations, dedicated to electriciansThe device is also a comprehensive tester for the safety of electrical installationsThe UT-593 allows you to measure insulation resistance, short circuit loop impedance with/without RCD tripping, line impedance, continuity of protective and...

TEMPERATURE METER UT-300H 32 C ... 42.9 C UNI-T

The UT-300H pyrometer allows for accurate, non-contact measurement of the object's temperatureAttention!The device is not intended for medical use

MULTIFUNCTION METER FOR ELECTRICAL INSTALLATIONS UT-595 UNI-T

The UT-595 is a multifunction meter for measurements in electrical installations, dedicated to electriciansThe device is also a comprehensive tester for the safety of electrical installationsThe UT-595 allows you to measure insulation resistance, short circuit loop impedance with/without RCD tripping, line impedance, continuity of protective and...

LOW RESISTANCE METER UT-620A UNI-T

The UT-620A meter allows you to measure low resistances (even a few mΩ)Due to the intended use of the device, the measurement should always be performed with the use of dedicated measurement probes attached to the product

MAINS SOCKET TESTER UT-07A-EU UNI-T

The UT-07A-EU tester indicates the correctness of the L, N, PE wiring in the electrical socketThe device case is made from a solid plastic, which guarantees the reliability and long-term working during the installations.

TEMPERATURE METER UT-309C -35 C ... 650 C UNI-T

The UT-309C pyrometer allows for accurate, non-contact measurement of the object's temperatureAttention!The device is not intended for medical use

CABLES TESTER CS-WT-240A

The CS-WT-240A tester is used to measure cable continuity, check the type of UTP and detect the condition of the telephone lineThe device allows you to perform measurements on telephone lines, twisted-pair cables and coaxial cablesAn additional function is the ability to search for a specific wire from among more tangled cables or in a large bundle of wires

LIVE WIRE, METAL AND WOOD DETECTOR DM-2 ORNO

The DM-2 detector allows to detect wooden, metal objects and live wires placed in the wall